Constant Duty Onboard Air System - 10007

Description

Constant Duty Onboard Air System - 10007
Intended for inflation of tires up to 37 inches. Designed to be installed and mounted onto the vehicle.
Includes all parts needed for installation of you very own onboard air solution for tire maintenance and small pneumatic tools
Comes with a VIAIR 450C Air compressor and a 110 to 145 PSI Pressure switch.
150 PSI maximum working pressure and 100% duty cycle at 100 PSI; 20feet 12-Gauge Wire with Inline Fuse Holder
Can inflate four tires up to 37 inches in diameter. Designed for uninterrupted use for up to an hour! (at 72 degrees ambient temperature) One year manufacturer's defect warranty included with copy of the receipt. Please check the manufacturer's website for a wiring diagram.
Ingress Protection Rating: IP67
Product Description Viair Constant Duty Onboard Air System for 37" Tires is a pre-packaged compressed air solution that provides a faster, 33 percent duty cycle, 450C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires with nothing further to purchase. Features a permanent magnetic motor and 100 PSI of pressure. Amazon.com VIAIR's Constant Duty Onboard Air System (OAS) is an all-in-one compressed air solution designed to work in conjunction with the vehicle it is mounted on. Included in this unit is a 150 PSI, 100% duty cycle VIAIR 450C compressor, a 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires 37" or larger. This powerful compression ability, along with the system's included pressure switch, 2.5 gallon air tank, multiple ¼" NPT port openings and more make it the perfect solution for users who need to go mobile with their pneumatic tool set. Compression for Most Applications Including Off Road Rated for inflation of 37" tires and up as well as a variety of pneumatic tools, VIAIR's Constant Duty OAS is a match for, and tough enough for just about any compression application imaginable. The system is designed to be mounted on compatible vehicles, effectively creating a pneumatic workshop on wheels. Supplied components include a 100% duty cycle 450C compressor with 150 PSI capabilities, a 2.5 gallon air tank, a pressure switch with relay, a dash panel gauge with on/off switch and a variety of additional components needed to install the working system in your vehicle. As the "Constant Duty" name implies, this system is designed for heavy continuous work, yet although it does not require resting, it should not be run for more than an hour at a time. No matter the task, the Constant Duty Onboard Air System can supply the air needed to get jobs done. 150 PSI of continuous power available from your vehicle. . Everything you need right out of the box to turn your vehicle into a mobile repair shop of pneumatic tools. . Easy to mount and configure for different uses. . System Specifications Motor voltage - 12 volt Motor type - Permanent magnetic Max. duty cycle: 100% @ 100 PSI Max. working pressure - 150 PSI Max. Amp draw - 19 Amps Max. ambient temperature - 158°F Min. ambient temperature - -40°F CFM @ 0 PSI - 1.66 ¼" NPT Intake Port Fill Rates:   2.5 Gallon Tank 0 - 105 PSI 1 min. 55 sec. 0 - 145 PSI 3 min. 02 sec. 85 - 105 PSI 28 min. 00 sec. 110 - 145 PSI 59 min. 00 sec. 1-Year Limited Warranty VIAIR Corporation warrants this product, when properly installed and under normal conditions of use, to be free from defects in workmanship and materials for a period of one (1) year from its original date of purchase. This warranty covers product defects only. It does not cover incidental or consequential damages as a result of misuse or abuse. What's in the Box 1-2.5 gallon VIAIR air tank (six port) 1-450C 150 PSI VIAIR air compressor 1-35' coil hose with clip-on tire chuck 1-¼" NPT quick connect coupler (F) 1-Dash panel gauge with on/off Switch 1-Pressure switch with relay (110 PSI-on, 150 PSI-off) 1-reducer (⅛" NPT F to ¼" NPT M) 1-¼" NPT - 175 PSI safety valve 1-¼" NPT drain cock 1-¼" NPT compression fittings 1-4" Strip of continuous grommet material 1-20' section of 12 gauge wire with inline fuse holder All necessary electrical connectors 1-Accessory airline Owner's manual About VIAIR Corporation VIAIR offers the most complete line of air compressors and air accessories for both the on-and off-road markets available anywhere. VIAIR products are used in the OEM segment, 4x4 and Sport Air Suspension and have become the industry standard for both 12- and 24-volt automotive applications worldwide. Their compressors are currently being used in every corner of the globe, in the harshest climates imaginable and the company is recognized by its
Shipping
We offer FREE shipping on all orders!
We ship within Three business days of payment, usually sooner.
We use a selection of shipping services such as UPS, FedEx, USPS etc.
We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed.
Local pickups and combined shipping options are not provided at this time.
Return
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Feedback
Customer satisfaction is very important to us.
If you have any problem with your order, please contact us and we will do our best to make you satisfied.
Contact Us
If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays.
Please visit our eBay store to check out other items for sale!
Thank you for shopping at our store.